Samsung Desensamble & Reensamble free download

File name Desensamble & Reensamble.pdf

Disassembly & Reassembly 3. Disassembly&Reassembly 3-1 OverallDisassembly&Reassembly 3-1-1 DisassemblingtheCabinet Part Name Description Description Photo Back Remove the 9 screws fixing the Back Cover Cover & Terminal Board. : RH, +, M4, L15,ZPC(BLK), SWRCH18A Tap the Back Cover 2 or 3 times and pull the cover and remove it. Since there is a danger of injury from the remaining current and of damaging the product due to static electricity, make sure to remove the power cord and wait for a moment so that the remaining current is discharged completely before disassembling the product. Samsung Electronics 3-1 Disassembly & Reassembly 3-1-2 DisassemblingtheCRTandChassis Part Name Description Description Photo Chassis Separate the Ass'y Holder chassis from Holder the Front Cabinet. Pull the Holder Chassis while pushing the catch up. you pull it with excessive power, it may If cause damage to the catch or connector. Therefore, pull it until the catch is out of Pull the chassis while pushing the clip fixing the Front Cabinet and the hole. the Holder Chassis. Separate the CRT connection, the TBC wire,and the the speaker connection. Since there is a hinge fixing the Wire Connector and Connector Header, if the wire is pulled with excessive power, it may damage the catch or connector. Therefore, pull it only after pressing the Pull the chassis while pushing the clip fixing the Front Cabinet and hinge down completely. Front Cabinet and Pull the chassis while pushing the clip fixing the the Holder Chassis. the Holder Chassis. Separate the D-Coil, DY-Cable and power cord from the Front Cabinet and Main Board. Separate the power cord, DY-Cable by pushing the fixing catch to the side and pulling the wire up. Pull the chassis while pushing the clip fixing the Front Cabinet and